Do I have to do all the other driver updates that came out before this too? I didn't do 103, so will skipping 103 give me everything from 103 and 104? Should I go thru and update every driver update one by one?
Just uninstall the existing driver and install the latest driver and you are good to go. Each driver is standalone, no need to do all the in between ones.
Submitted by Guinnness on Fri, 01/29/2010 - 12:06.
I just updated with 1.04 and i've got a problem : calibrate button stay greyed
As my wheel's center is a little bit on the left i need to calibrate it to have a perfect center so for me this driver is almost unusable as is.
Please use the hardware calibration with the hotkey. The driver solution is only needed for PWT. All other wheels can be calibrated by a hot key. Please check the manual.
Confirmed -- with the PWT the calibration routine works just fine. Good stuff.
Also the telemetry on the driver panel is smoother than it ever has been, which gives a really good impression of the responsiveness of the wheel now. Lovely to watch.
The only problem I have, and this was the case in 102 as well (only tried these two drivers under Win7x64, PWT, new dongle), is that when I plug in the wheel it slowly rotates from extreme to extreme, until I change a setting in the Settings panel. I remember other people having this issue, is there a simple fix? Its just a hassle is all.
the new driver works well..... i tested it atm with gtr evo and rfactor.
but i think that i found a problem in the new rfactor plugin. with it in game works only the vibration on the brake on my clubsport pedals connected via USB.....the vibration on the wheel doesn't work..... the telemetry data is set well......for be sure i try to instal the old plugin (the one present with the driver version 100) and with that plugin (that seems that works also with the new driver 104) i can have the vibration of the well with the vibration of the brake!!! ;)
Submitted by supersportbilly on Mon, 01/18/2010 - 12:29.
Agreed the drivers seem more refined - the only problem that I am having is that I use drift mode setting 5 on iRacing and the setting sometimes gets lost and seems to revert to drift mode off although still shows 5 in the driver properties page.
The drift mode usually needs to be reset to 5 again after a reboot although once again it shows as set to 5 but feels as if it is switched off.
Otherwise no problems - GT3RS & CS pedals - superb.
Same here, no problems whatsoever with my GT3RS with Clubsport pedals, the best driver..tested on Richard Burns, Race 07, GTR2, GTL and others... flawlessly
Windows Vista 64-bit, 6gb ram, i7 920 @ 3.21ghz, ati 4870 with 2048mb ram.
GT3 RS wheel with Clubsport pedals.
5 hours on GTL with driver 104 and everything running great.
No shaking curb issues.
Driver working great with NFS Shift and Dirt2.
Controller test page working properly.
Pedal vibration test working great.
Replies - Comments
Do I have to do all the
Do I have to do all the other driver updates that came out before this too? I didn't do 103, so will skipping 103 give me everything from 103 and 104? Should I go thru and update every driver update one by one?
Just uninstall the existing
Just uninstall the existing driver and install the latest driver and you are good to go. Each driver is standalone, no need to do all the in between ones.
I just updated with 1.04 and
I just updated with 1.04 and i've got a problem : calibrate button stay greyed
As my wheel's center is a little bit on the left i need to calibrate it to have a perfect center so for me this driver is almost unusable as is.
Works perfectly with 1.02 (haven't tried 1.03)
Same here.
Same here.
Please use the hardware
Please use the hardware calibration with the hotkey. The driver solution is only needed for PWT. All other wheels can be calibrated by a hot key. Please check the manual.
Confirmed -- with the PWT
Confirmed -- with the PWT the calibration routine works just fine. Good stuff.
Also the telemetry on the driver panel is smoother than it ever has been, which gives a really good impression of the responsiveness of the wheel now. Lovely to watch.
The only problem I have, and this was the case in 102 as well (only tried these two drivers under Win7x64, PWT, new dongle), is that when I plug in the wheel it slowly rotates from extreme to extreme, until I change a setting in the Settings panel. I remember other people having this issue, is there a simple fix? Its just a hassle is all.
the new driver works
the new driver works well..... i tested it atm with gtr evo and rfactor.
but i think that i found a problem in the new rfactor plugin. with it in game works only the vibration on the brake on my clubsport pedals connected via USB.....the vibration on the wheel doesn't work..... the telemetry data is set well......for be sure i try to instal the old plugin (the one present with the driver version 100) and with that plugin (that seems that works also with the new driver 104) i can have the vibration of the well with the vibration of the brake!!! ;)
i hope to be helpfull!!! ;)
Thanks. We noticed that as
Thanks. We noticed that as well and will fix it.
Agreed the drivers seem more
Agreed the drivers seem more refined - the only problem that I am having is that I use drift mode setting 5 on iRacing and the setting sometimes gets lost and seems to revert to drift mode off although still shows 5 in the driver properties page.
The drift mode usually needs to be reset to 5 again after a reboot although once again it shows as set to 5 but feels as if it is switched off.
Otherwise no problems - GT3RS & CS pedals - superb.
Cheers
Great, the Porsche Wheel
Great, the Porsche Wheel Property Page now works on my laptop.
(Had a problem before where it frooze when trying to calibrate the wheel)
Same here, no problems
Same here, no problems whatsoever with my GT3RS with Clubsport pedals, the best driver..tested on Richard Burns, Race 07, GTR2, GTL and others... flawlessly
Congrats Thomas, and all Fanatec Team! Superb!
Win7 Professional 64-bit
best regards
Windows Vista 64-bit, 6gb
Windows Vista 64-bit, 6gb ram, i7 920 @ 3.21ghz, ati 4870 with 2048mb ram.
GT3 RS wheel with Clubsport pedals.
5 hours on GTL with driver 104 and everything running great.
No shaking curb issues.
Driver working great with NFS Shift and Dirt2.
Controller test page working properly.
Pedal vibration test working great.
By far the best driver :)
Just installed these and
Just installed these and they work wonderfully! Slider works properly and also the brake vibrator test functions properly. Well done all!
Hey thomas . Is ther coming
Hey thomas .
Is ther coming som firmware to the clubsport pedals in 64 bit ? :)